ME7868A
Distributed Modular 2-port VNA ME7868A
- 제품설명2 포트 USB VNA 시스템은 100미터 이상의 위상 동기화된 측정을 제공하며, 8 / 20 / 43.5GHz 모델에서 사용할 수 있는 s-파라미터 측정의 다이내믹레인지 및 측정 안정성을 개선합니다.
- 제조사Anritsu
- 원산지USA
- 예상가격 견적문의
설명
ShockLine™ ME7868A 시스템은 Anritsu의 Extended-K™ 컴포넌트를 활용하여 1MHz에서 43.5GHz까지 보장된 성능을 제공하는 최초의 분산형 완전 역방향(riversing) 2 포트 VNA 솔루션입니다. 혁신적인 PhaseLync™ 기술로 구동되는 이 기술은 엔지니어가 두 개의 휴대용 ShockLine MS46131A VNA를 동기화하고 DUT에 직접 연결하여 100미터 이상의 거리에서 벡터 전송 측정을 수행할 수 있도록 합니다. 제조, 엔지니어링 또는 교육 환경에서 이 솔루션은 긴 케이블로 기존 벤치 탑 VNA를 사용할 필요를 제거하여 장거리 S-파라미터 측정 및 VNA 테스트 시스템 통합을 단순화하여 삽입 손실을 제거하고 측정 안정성을 개선하며 설치 비용을 절감합니다.
ShockLine ME7868A는 구성 가능한 VNA 설정을 제공하여 하드웨어 활용도를 극대화합니다. 세션별로 VNA 포트 수 (단일 1 포트, 이중 1 포트 또는 단일 2 포트)를 쉽게 설정하여 유연성을 극대화합니다. 타임 게이팅 옵션이 있는 저역 통과 시간 도메인을 사용하면 사용자는 불연속성을 특성화하기 위해 대역 통과 시간 도메인보다 더 높은 해상도로 TDR과 유사한 디스플레이에 액세스 할 수 있습니다. 온보드 데이터 저장소가 없기 때문에 보안 애플리케이션을 위해 데이터를 제거할 필요가 없습니다.
Feature
◐ 1MHz ~ 8GHz / 20GHz / 43.5GHz의 주파수 옵션이 있는 2 포트 VNA
◐ PhaseLync 동기화로 원격 포트를 100미터 이상 확장
◐ 작고 가벼운 포트로 DUT에 직접 연결할 수 있으므로 긴 케이블이 필요하지 않습니다.
◐ Extended-K™ 포트로 43.5GHz까지 성능 보장
◐ PC 제어는 외부 컴퓨터 처리 능력과 기능을 활용합니다.
◐ 온보드 데이터 스토리지가 없어 안전한 애플리케이션에서 더 편리하게 사용할 수 있습니다.
◐ 공통 ShockLine 제어 소프트웨어는 강력한 디버그 및 테스트 기능을 제공합니다.
Calibration and Verification Kits and Components
Precision Automatic Calibrator Modules
| Model | Description |
|---|---|
|
MN25208A
|
2-port USB SmartCal Module, 300 kHz to 8.5 GHz (available with connector options :
-001 N(f), -002 K(f), -003 3.5 mm(f), -004 SMA(f))
|
|
MN25408A
|
4-port USB SmartCal Module, 300 kHz to 8.5 GHz (available with N(f) connectors)
|
|
MN25218A
|
2-port USB SmartCal Module, 1 MHz to 20 GHz (available with K(f) connectors)
|
|
MN25418A
|
4-port USB SmartCal Module, 300 kHz to 20 GHz (available with K(f) connectors)
|
|
36585K-2M
|
K Precision AutoCal Module, 70 kHz to 40 GHz, K(m) to K(m)
|
|
36585K-2F
|
K Precision AutoCal Module, 70 kHz to 40 GHz, K(f) to K(f)
|
|
36585K-2MF
|
K Precision AutoCal Module, 70 kHz to 40 GHz, K(m) to K(f)
|
|
2000-1809-R
|
Serial to USB Adapter (required for 36585 AutoCal module if control PC does not have a serial port)
|
Mechanical Calibration Kits
| Model | Description |
|---|---|
|
3650A
|
SMA/3.5 mm Calibration Kit, Without Sliding Loads, DC to 26.5 GHz, 50 Ω
|
|
3650A-1
|
SMA/3.5 mm Calibration Kit, With Sliding Loads, DC to 26.5 GHz, 50 Ω
|
|
3652A
|
K Connector Calibration Kit, Without Sliding Loads, DC to 40 GHz, 50 Ω
|
|
3653A
|
N Connector Calibration Kit, Without Sliding Loads, DC to 18 GHz, 50 Ω
|
|
OSLN50A-8
|
Precision N Male Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω
|
|
OSLNF50A-8
|
Precision N Female Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω
|
|
TOSLN50A-8
|
Precision N Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω
|
|
TOSLNF50A-8
|
Precision N Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω
|
|
OSLN50A-18
|
Precision N Male Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω
|
|
OSLNF50A-18
|
Precision N Female Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω
|
|
TOSLN50A-18
|
Precision N Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω
|
|
TOSLNF50A-18
|
Precision N Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω
|
|
TOSLK50A-20
|
Precision K Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 20 GHz, 50 Ω
|
|
TOSLKF50A-20
|
Precision K Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 20 GHz, 50 Ω
|
|
TOSLK50A-40
|
Precision K Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 40 GHz, 50 Ω
|
|
TOSLKF50A-40
|
Precision K Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 40 GHz, 50 Ω
|
|
TOSLK50A-43.5
|
Precision K Male Through/Open/Short/Load Mechanical Calibration Tee with S1P data, DC to 43.5 GHz, 50 Ω
|
|
TOSLKF50A-43.5
|
Precision K Female Through/Open/Short/Load Mechanical Calibration Tee with S1P data, DC to 43.5 GHz, 50 Ω
|
Cables and Adapters
Cables and Adapters
| Model | Description |
|---|---|
|
1091-26-R
|
SMA(m) to N(m), DC to 18 GHz, 50 Ω
|
|
1091-27-R
|
SMA(f) to N(m), DC to 18 GHz, 50 Ω
|
|
1091-80-R
|
SMA(m) to N(f), DC to 18 GHz, 50 Ω
|
|
1091-81-R
|
SMA(f) to N(f), DC to 18 GHz, 50 Ω
|
|
71693-R
|
Ruggedized adapter, K(f) to N(f), DC to 18 GHz, 50 Ω
|
|
34NK50
|
Precision Adapter, N(m) to K(m), DC to 18 GHz, 50 Ω
|
|
34NKF50
|
Precision Adapter, N(m) to K(f), DC to 18 GHz, 50 Ω
|
|
34NFK50
|
Precision Adapter, N(f) to K(m), DC to 18 GHz, 50 Ω
|
|
34NFKF50
|
Precision Adapter, N(f) to K(f), DC to 18 GHz, 50 Ω
|
|
K220B
|
Precision Adapter, K(m) to K(m), DC to 40 GHz, 50 Ω
|
|
K222B
|
Precision Adapter, K(f) to K(f), DC to 40 GHz, 50 Ω
|
|
K224B
|
Precision Adapter, K(m) to K(f), DC to 40 GHz, 50 Ω
|
|
33KK50C
|
Calibration Grade Adapter, K(m) to K(m), DC to 43.5 GHz, 50 Ω
|
|
33KKF50C
|
Calibration Grade Adapter, K(m) to K(f), DC to 43.5 GHz, 50 Ω
|
|
33KFKF50C
|
Calibration Grade Adapter, K(f) to K(f), DC to 43.5 GHz, 50 Ω
|
|
34VFK50A
|
Precision Adapter, V(f) to K(m), DC to 43.5 GHz, 50 Ω
|
|
34VFKF50A
|
Precision Adapter, V(f) to K(f), DC to 43.5 GHz, 50 Ω
|
|
34VK50A
|
Precision Adapter, V(m) to K(m), DC to 43.5 GHz, 50 Ω
|
|
34VKF50A
|
Precision Adapter, V(m) to K(f), DC to 43.5 GHz, 50 Ω
|
Test Port Cables, Flexible, Ruggedized, Phase Stable
|
Model
|
Description
|
|---|---|
|
15NNF50-1.0B
|
Test Port Cable, Flexible, Phase Stable, 1.0 m (39”), DC to 18 GHz, N(f) to N(m), 50 Ω
|
|
15NNF50-1.5B
|
Test Port Cable, Flexible, Phase Stable, 1.5 m (59”), DC to 18 GHz, N(f) to N(m), 50 Ω
|
|
15NN50-1.0B
|
Test Port Cable, Flexible, Phase Stable, 1.0 m (39”), DC to 18 GHz, N(m) to N(m), 50 Ω
|
|
15LL50-1.0A
|
Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, 3.5 mm(m) to 3.5 mm(m), 50 Ω
|
|
15LLF50-1.0A
|
Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, 3.5 mm(m) to 3.5 mm(f), 50 Ω
|
|
15KK50-1.0A
|
Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, K(m) to K(m), 50 Ω
|
|
15KKF50-1.0A
|
Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, K(m) to K(f), 50 Ω
|
|
3671KFS50-60
|
Test Port Cable, Flexible, Phase Stable, DC to 26.5 GHz, K(f) to 3.5 mm(m), 63.5 cm, 50 Ω
|
|
3671KFK50-60
|
Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(m), 63.5 cm (25 in), 50 Ω
|
|
3671KFKF50-60
|
Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(f), 63.5 cm (25 in), 50 Ω
|
|
3671KFK50-100
|
Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(m), 1 m (38 in), 50 Ω
|
|
806-304-R
|
Flexible Phase Stable Cable, DC to 40 GHz, 36 in (91.5 cm), K(m) – K(f), 50Ω
|
|
806-423-R
|
Flexible Phase Stable Cable, DC to 43.5 GHz, 24 in (61 cm), K(f) – K(f), 50 Ω
|
|
806-424-R
|
Flexible Phase Stable Cable, DC to 43.5 GHz, 24 in (61 cm), K(m) – K(f), 50 Ω
|
|
806-425-R
|
Flexible Phase Stable Cable, DC to 43.5 GHz, 1 m (39.4 in), K(f) – K(f), 50 Ω
|
|
806-426-R
|
Flexible Phase Stable Cable, DC to 43.5 GHz, 1 m (39.4 in), K(m) – K(f), 50 Ω
|
Phase-Stable 18 GHz, 40 GHz, and 43.5 GHz Semi-Rigid Cables (Armored)
|
Model
|
Description
|
|---|---|
|
3670N50-1
|
Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 18 GHz, N(m) to N(f), 50 Ω
|
|
3670N50-2
|
Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 18 GHz, N(m) to N(f), 50 Ω
|
|
3670NN50-1
|
Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 18 GHz, N(m) to N(m), 50 Ω
|
|
3670NN50-2
|
Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 18 GHz, N(m) to N(m), 50 Ω
|
|
3670K50A-1
|
Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 43.5 GHz, K(m) to K(f), 50 Ω
|
|
3670K50A-2
|
Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 43.5 GHz, K(m) to K(f), 50 Ω
|
Accessories
Tools
|
Model
|
Description
|
|---|---|
|
01-200
|
Calibrated Torque End Wrench, GPC-7 and Type N
|
|
01-201
|
Torque End Wrench, 5/16 in, 0.9 N.m (8 lbf·in) (for tightening male devices, for SMA, 3.5 mm, 2.4 mm, K, and V connectors)
|
|
01-203
|
Torque End Wrench, 13/16 in, 0.9 N.m (8 lbf·in) (for tightening ruggedized SMA, 2.4 mm, K and V test port connectors)
|
|
01-204
|
End Wrench, 5/16 in, Universal, Circular, Open-ended (for SMA, 3.5 mm, 2.4 mm, K, and V connectors)
|
Third Party Solutions
Anritsu는 VectorStar 및 ShockLine 벡터 네트워크 분석기 제품군과 호환되는 입증된 다양한 재료 측정 기능을 제공하기 위해 다음과 같은 업계 선도 기업과 제휴했습니다.
Material Measurements
 |
Compass Technology
Choose from off-the-shelf or custom-designed RF material measurement systems able to measure material properties from 100 MHz to 90 GHz. These solutions include: focused beam, resonant cavity, waveguides, spot probes, free space measurement systems, and more. Anritsu and Compass Technology Group Material Measurements Solutions Compass Technology Group VectorStar Integration [video] |
 |
Keycom Technologies Select from a variety of material measurement solutions that leverage various methods including: resonator, frequency change, probe type, co-axial tube and waveguide type S-parameter, free space, capacitance, epsilometery, and more. Anritsu and Keycom Material Measurement Solution |
 |
SWISSto12 Providing hardware and software technology capable of measuring: solid samples; soft sample and foam; liquid samples and powder; thin films; dielectric coatings and multilayer materials; alumina plate; and more.
Anritsu and SWISSto12 Material Measurement Solution
|
APPLICATION
장거리 S-파라미터 측정
◐ 긴 케이블 삽입 손실 테스트
◐ 안테나 테스트
◐ OTA (Over the Air) 애플리케이션
- 챔버 설치
- 대형 차량 RF 차폐 및 전파 테스트
시스템 통합 애플리케이션
◐ 시스템 교정
◐ 경로 손실 특성화
◐ 일반 s-파라미터 및 시간 도메인 측정
보안 영역 애플리케이션
◐ 장치에 데이터 저장 없음
◐ USB 직접 연결을 통한 안전한 외부 컴퓨터 제어
OPTIONS
Frequency Options
|
Option
|
Description
|
|---|---|
|
ME7868A-010-2
|
8 GHz, 2 meter system
|
|
ME7868A-010-5
|
8 GHz, 5 meter system
|
|
ME7868A-010-25
|
8 GHz, 25 meter system
|
|
ME7868A-020-2
|
20 GHz, 2 meter system
|
|
ME7868A-020-5
|
20 GHz, 5 meter system
|
|
ME7868A-020-25
|
20 GHz, 25 meter system
|
|
ME7868A-043-2
|
43.5 GHz, 2 meter system
|
|
ME7868A-043-5
|
43.5 GHz, 5 meter system
|
|
ME7868A-043-25
|
43.5 GHz, 25 meter system
|