MS46131A
Modular 1 port VNA MS46131A
- 제품설명경량, 소형, 1포트 VNA. 동일한 PC에서 최대 2개의 VNA를 제어하여 Return Loss 테스트 처리량(throughput) 향상. 8/20/43.5GHz 모델로 5G 디바이스를 측정합니다.
- 제조사Anritsu
- 원산지USA
- 예상가격 견적문의
설명
ShockLineTM MS46131A 시리즈는 1 MHz ~ 8/20/43.5 GHz 범위의 3개의 모듈식 1 포트 벡터 네트워크 분석기(VNA)로 구성됩니다. Anritsu의 특허받은 NLTL(Non-Linear Transmission Line) 기술 VNA-on-Chip 기술은 내부 VNA 아키텍처를 단순화하여 계측기의 크기와 비용을 절감하는 동시에 정확성과 측정 반복성을 향상시킵니다. ShockLine MS46131A 시리즈는 VNA 포트를 테스트 대상 장치(DUT)로 가져올 수 있을 정도로 작고 휴대성이 좋으며, 테스트 포트 케이블을 제거하여 측정 안정성을 높이고 테스트 구성을 단순화합니다.
ShockLine MS46131A 시리즈는 엔지니어링, 제조 및 교육 분야의 1 포트 RF 및 마이크로파 애플리케이션에 이상적입니다. 세 가지 VNA 모델은 모두 빠른 스위프 속도와 우수한 보정 지향성을 가지고 있어 수동 5G mmWave 부품 측정을 포함한 다양한 1 포트 디바이스 테스트 애플리케이션에 적합합니다.
두 개의 독립형 ShockLine MS46131A VNA는 USB를 통해 외부 사용자가 제공하는 PC에서 제어 할 수 있습니다. 이 시리즈에는 온-보드(탑재된?) 메모리가 없으므로 보안 애플리케이션에서 사용이 간편합니다.
휴대성과 성능의 조합으로 ShockLine MS46131A VNA 시리즈는 모듈식 수동(패시브) 디바이스 테스트 애플리케이션에 이상적입니다.
Feature
◐ 1 MHz ~ 8 GHz / 20 GHz / 43.5 GHz의 주파수 옵션이 있는 1 포트 VNA
◐ Extended-KTM 포트를 통해 43.5 GHz의 성능 보장
◐ PC 제어로 외부 컴퓨터 처리 능력 및 가능
◐ 작고 가벼운 패키지로 DUT에 직접 연결가능
◐ 내장 데이터 스토리지가 없으므로 안전한 애플리케이션에서 데이터를 삭제할 필요 없음
◐ 모든 ShockLine VNA는 GUI 및 프로그램 호환성을 지원하는 공통 소프트웨어를 공유
◐ 타임 게이트 옵션이 포함된 타임 도메인으로 쉽고 빠른 결함 식별 가능
Calibration and Verification Kits and Components
Precision Automatic Calibrator Modules
| Model | Description |
|---|---|
|
MN25208A
|
2-port USB SmartCal Module, 300 kHz to 8.5 GHz (available with connector options :
-001 N(f), -002 K(f), -003 3.5 mm(f), -004 SMA(f))
|
|
MN25408A
|
4-port USB SmartCal Module, 300 kHz to 8.5 GHz (available with N(f) connectors)
|
|
MN25218A
|
2-port USB SmartCal Module, 1 MHz to 20 GHz (available with K(f) connectors)
|
|
MN25418A
|
4-port USB SmartCal Module, 300 kHz to 20 GHz (available with K(f) connectors)
|
|
36585K-2M
|
K Precision AutoCal Module, 70 kHz to 40 GHz, K(m) to K(m)
|
|
36585K-2F
|
K Precision AutoCal Module, 70 kHz to 40 GHz, K(f) to K(f)
|
|
36585K-2MF
|
K Precision AutoCal Module, 70 kHz to 40 GHz, K(m) to K(f)
|
|
2000-1809-R
|
Serial to USB Adapter (required for 36585 AutoCal module if control PC does not have a serial port)
|
Mechanical Calibration Kits
| Model | Description |
|---|---|
|
3650A
|
SMA/3.5 mm Calibration Kit, Without Sliding Loads, DC to 26.5 GHz, 50 Ω
|
|
3650A-1
|
SMA/3.5 mm Calibration Kit, With Sliding Loads, DC to 26.5 GHz, 50 Ω
|
|
3652A
|
K Connector Calibration Kit, Without Sliding Loads, DC to 40 GHz, 50 Ω
|
|
3653A
|
N Connector Calibration Kit, Without Sliding Loads, DC to 18 GHz, 50 Ω
|
|
OSLN50A-8
|
Precision N Male Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω
|
|
OSLNF50A-8
|
Precision N Female Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω
|
|
TOSLN50A-8
|
Precision N Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω
|
|
TOSLNF50A-8
|
Precision N Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 8 GHz, 50 Ω
|
|
OSLN50A-18
|
Precision N Male Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω
|
|
OSLNF50A-18
|
Precision N Female Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω
|
|
TOSLN50A-18
|
Precision N Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω
|
|
TOSLNF50A-18
|
Precision N Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 18 GHz, 50 Ω
|
|
TOSLK50A-20
|
Precision K Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 20 GHz, 50 Ω
|
|
TOSLKF50A-20
|
Precision K Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 20 GHz, 50 Ω
|
|
TOSLK50A-40
|
Precision K Male Through/Open/Short/Load Mechanical Calibration Tee, DC to 40 GHz, 50 Ω
|
|
TOSLKF50A-40
|
Precision K Female Through/Open/Short/Load Mechanical Calibration Tee, DC to 40 GHz, 50 Ω
|
|
TOSLK50A-43.5
|
Precision K Male Through/Open/Short/Load Mechanical Calibration Tee with S1P data, DC to 43.5 GHz, 50 Ω
|
|
TOSLKF50A-43.5
|
Precision K Female Through/Open/Short/Load Mechanical Calibration Tee with S1P data, DC to 43.5 GHz, 50 Ω
|
Cables and Adapters
Cables and Adapters
| Model | Description |
|---|---|
|
1091-26-R
|
SMA(m) to N(m), DC to 18 GHz, 50 Ω
|
|
1091-27-R
|
SMA(f) to N(m), DC to 18 GHz, 50 Ω
|
|
1091-80-R
|
SMA(m) to N(f), DC to 18 GHz, 50 Ω
|
|
1091-81-R
|
SMA(f) to N(f), DC to 18 GHz, 50 Ω
|
|
71693-R
|
Ruggedized adapter, K(f) to N(f), DC to 18 GHz, 50 Ω
|
|
34NK50
|
Precision Adapter, N(m) to K(m), DC to 18 GHz, 50 Ω
|
|
34NKF50
|
Precision Adapter, N(m) to K(f), DC to 18 GHz, 50 Ω
|
|
34NFK50
|
Precision Adapter, N(f) to K(m), DC to 18 GHz, 50 Ω
|
|
34NFKF50
|
Precision Adapter, N(f) to K(f), DC to 18 GHz, 50 Ω
|
|
K220B
|
Precision Adapter, K(m) to K(m), DC to 40 GHz, 50 Ω
|
|
K222B
|
Precision Adapter, K(f) to K(f), DC to 40 GHz, 50 Ω
|
|
K224B
|
Precision Adapter, K(m) to K(f), DC to 40 GHz, 50 Ω
|
|
33KK50C
|
Calibration Grade Adapter, K(m) to K(m), DC to 43.5 GHz, 50 Ω
|
|
33KKF50C
|
Calibration Grade Adapter, K(m) to K(f), DC to 43.5 GHz, 50 Ω
|
|
33KFKF50C
|
Calibration Grade Adapter, K(f) to K(f), DC to 43.5 GHz, 50 Ω
|
|
34VFK50A
|
Precision Adapter, V(f) to K(m), DC to 43.5 GHz, 50 Ω
|
|
34VFKF50A
|
Precision Adapter, V(f) to K(f), DC to 43.5 GHz, 50 Ω
|
|
34VK50A
|
Precision Adapter, V(m) to K(m), DC to 43.5 GHz, 50 Ω
|
|
34VKF50A
|
Precision Adapter, V(m) to K(f), DC to 43.5 GHz, 50 Ω
|
Test Port Cables, Flexible, Ruggedized, Phase Stable
| Model | Description |
|---|---|
|
15NNF50-1.0B
|
Test Port Cable, Flexible, Phase Stable, 1.0 m (39”), DC to 18 GHz, N(f) to N(m), 50 Ω
|
|
15NNF50-1.5B
|
Test Port Cable, Flexible, Phase Stable, 1.5 m (59”), DC to 18 GHz, N(f) to N(m), 50 Ω
|
|
15NN50-1.0B
|
Test Port Cable, Flexible, Phase Stable, 1.0 m (39”), DC to 18 GHz, N(m) to N(m), 50 Ω
|
|
15LL50-1.0A
|
Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, 3.5 mm(m) to 3.5 mm(m), 50 Ω
|
|
15LLF50-1.0A
|
Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, 3.5 mm(m) to 3.5 mm(f), 50 Ω
|
|
15KK50-1.0A
|
Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, K(m) to K(m), 50 Ω
|
|
15KKF50-1.0A
|
Test Port Cable, Armored, Phase Stable, 1.0 m (39”), DC to 20 GHz, K(m) to K(f), 50 Ω
|
|
3671KFS50-60
|
Test Port Cable, Flexible, Phase Stable, DC to 26.5 GHz, K(f) to 3.5 mm(m), 63.5 cm, 50 Ω
|
|
3671KFK50-60
|
Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(m), 63.5 cm (25 in), 50 Ω
|
|
3671KFKF50-60
|
Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(f), 63.5 cm (25 in), 50 Ω
|
|
3671KFK50-100
|
Test Port Cable, Flexible, Phase Stable, DC to 40 GHz, K(f) to K(m), 1 m (38 in), 50 Ω
|
|
806-304-R
|
Flexible Phase Stable Cable, DC to 40 GHz, 36 in (91.5 cm), K(m) – K(f), 50Ω
|
|
806-423-R
|
Flexible Phase Stable Cable, DC to 43.5 GHz, 24 in (61 cm), K(f) – K(f), 50 Ω
|
|
806-424-R
|
Flexible Phase Stable Cable, DC to 43.5 GHz, 24 in (61 cm), K(m) – K(f), 50 Ω
|
|
806-425-R
|
Flexible Phase Stable Cable, DC to 43.5 GHz, 1 m (39.4 in), K(f) – K(f), 50 Ω
|
|
806-426-R
|
Flexible Phase Stable Cable, DC to 43.5 GHz, 1 m (39.4 in), K(m) – K(f), 50 Ω
|
Phase-Stable 18 GHz, 40 GHz, and 43.5 GHz Semi-Rigid Cables (Armored)
| Model | Description |
|---|---|
|
3670N50-1
|
Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 18 GHz, N(m) to N(f), 50 Ω
|
|
3670N50-2
|
Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 18 GHz, N(m) to N(f), 50 Ω
|
|
3670NN50-1
|
Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 18 GHz, N(m) to N(m), 50 Ω
|
|
3670NN50-2
|
Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 18 GHz, N(m) to N(m), 50 Ω
|
|
3670K50A-1
|
Test Port Cable, Armored, Semi-rigid, 30.48 cm (1 ft), DC to 43.5 GHz, K(m) to K(f), 50 Ω
|
|
3670K50A-2
|
Test Port Cable, Armored, Semi-rigid, 60.96 cm (2 ft), DC to 43.5 GHz, K(m) to K(f), 50 Ω
|
Accessories
Tools
| Model | Description |
|---|---|
|
01-200
|
Calibrated Torque End Wrench, GPC-7 and Type N
|
|
01-201
|
Torque End Wrench, 5/16 in, 0.9 N.m (8 lbf·in) (for tightening male devices, for SMA, 3.5 mm, 2.4 mm, K, and V connectors)
|
|
01-203
|
Torque End Wrench, 13/16 in, 0.9 N.m (8 lbf·in) (for tightening ruggedized SMA, 2.4 mm, K and V test port connectors)
|
|
01-204
|
End Wrench, 5/16 in, Universal, Circular, Open-ended (for SMA, 3.5 mm, 2.4 mm, K, and V connectors)
|
Third Party Solutions
Anritsu는 VectorStar 및 ShockLine 벡터 네트워크 분석기 제품군과 호환되는 입증된 다양한 재료 측정 기능을 제공하기 위해 다음과 같은 업계 선도 기업과 제휴했습니다.
Material Measurements
 |
Compass Technology
Choose from off-the-shelf or custom-designed RF material measurement systems able to measure material properties from 100 MHz to 90 GHz. These solutions include: focused beam, resonant cavity, waveguides, spot probes, free space measurement systems, and more.
Anritsu and Compass Technology Group Material Measurements Solutions Compass Technology Group VectorStar Integration [video] |
 |
Keycom Technologies
Select from a variety of material measurement solutions that leverage various methods including: resonator, frequency change, probe type, co-axial tube and waveguide type S-parameter, free space, capacitance, epsilometery, and more. Anritsu and Keycom Material Measurement Solution |
 |
SWISSto12
Providing hardware and software technology capable of measuring: solid samples; soft sample and foam; liquid samples and powder; thin films; dielectric coatings and multilayer materials; alumina plate; and more. Anritsu and SWISSto12 Material Measurement Solution |
APPLICATION
RF 패시브 부품 테스트 및 문제 해결
◐ 1포트 테스트에서 43.5GHz까지
◐ 단일 PC에서 최대 2개의 1포트 VNA 제어
케이블 테스트
◐ 결함까지의 거리 (Distance to fault)
◐ Return Loss
◐ 위상(Phase) 측정
안테나 테스트
◐ VSWR / Return Loss
◐ 대역폭 (Bandwidth)
보안 영역 애플리케이션
◐ 장비에 데이터 스토리지 없음
◐ 직접 USB 연결을 통한 외부 컴퓨터 제어 보안
OPTIONS
Frequency Options
| Option | Description |
|
MS46131A-010
|
1 MHz — 8 GHz, type N(f) ports
|
|
MS46131A-020
|
1 MHz — 20 GHz, type ruggedized K(m) ports (compatible with 3.5 mm and SMA connectors)
|
|
MS46131A-043
|
1 MHz – 43.5 GHz, type ruggedized Extended-K™ (m) ports (compatible with standard K, 3.5 mm, and SMA connectors)
|
Other Options
| Option | Description |
|---|---|
|
MS46131A-002
|
Time Domain with Time Gating
|